高强不锈钢绞线网与ECC黏结-滑移关系模型

高强不锈钢绞线网与ECC的黏结是二者协同工作的基础，且黏结 滑移关系模型是其黏结性能的综合反映，故通过对17组51个高强不锈钢绞网增强ECC薄板试件进行单边拉拔试验，研究横向钢绞线间距、纵向钢绞线直径和相对锚固长度等因素对钢绞线网在ECC中黏结性能的影响规律。试验结果表明，横向钢绞线的设置可使黏结破坏由脆性破坏转变为延性破坏；高强不锈钢绞线网与ECC的黏结滑移曲线可分为5个阶段，分别为上升段、微降段、延性强化段、下降段和残余段。基于试验结果，对钢绞线网在ECC中的黏结破坏特征和黏结 滑移机理进行分析，在相关黏结-滑移关系模型的基础上，提出钢绞线网与ECC的黏结 滑移关系模型，并进行模型参数分析。所提模型及模型参数计算公式与试验结果吻合良好，能较好地反映钢绞线网与ECC的界面黏结滑移特征。     

基于BIM技术和有限元的检测与分析在PC结构中的应用研究

本文建立了PC结构施工全过程的BIM模型及有限元分析模型,对施工过程进行数值模拟与动态、静态监测,对装配式结构进行了结构性能评价,为结构可视化施工监测提供了技术支持。     

Revisiting CO2 emissions convergence in G18 countries

This study revisits whether CO₂ emissions converge in G18 countries over the period of 1950–2013. To work on this empirical analysis, we employ a more powerful quantile unit root test with per capita CO₂ emissions. While conventional unit root tests fail to reject convergence in CO₂ emissions in these G18 countries, quantile unit root test results demonstrate CO₂ emissions converged in 5 of these G18 countries (i.e., Australia, Brazil, Canada, Germany, and India). Our empirical results have important policy implications for the governments of G18 countries to direct efficient and effective energy policies to reduce the CO₂ emissions.     

Inhibition of stress corrosion cracking in 304 stainless steel through titanium ion implantation

The effects of titanium ion implantation on the stress corrosion cracking (SCC) behaviour of 304 austenitic stainless steel were studied. Slow strain rate tests (SSRTs) were conducted on 304 steel in air and in 5?wt-% NaCl solution. The microscopic effects of ion implantation were evaluated by Stopping and Range of Ions in Matter Procedures (SRIM). Fracture morphologies and microstructures were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The fracture surfaces illustrate that ion implantation significantly inhibits the corrosion pits that initiate SCC. A dense passive film, which inhibits SCC, was formed during the ion implantation process. SCC initiation was restrained due to the dense dislocation nets that were generated by titanium ion implantation.

Highlights

• Ion implantation inhibits SCC susceptibility.

• The lack of Cr at the grain boundary leads to the expansion of SCC along the grain boundary.

• Implantation-induced damage leads to high-density dislocations.

• The surface was amorphised due to high-density dislocations.

     

车轮多边形磨耗统计规律及关键影响因素分析

针对列车车轮多边形磨耗问题广泛存在于轨道交通运输领域,会导致车辆/轨道系统产生高频的振动冲击,严重影响车辆和轨道系统零部件的使用寿命,危及行车安全这一问题,调查了大量车轮的多边形磨耗情况并进行统计分析,掌握了高速列车车轮多边形磨耗问题的现状和特点。以18～20阶多边形磨耗车辆为例,通过理论研究和试验分析(试验分析包括车辆系统振动特性测试和转向架模态特性测试),对车轮多边形磨耗的根本原因及诱导因素进行研究。研究发现,轮轨系统在580 Hz频率附近存在固有模态是导致车辆发生18～20阶多边形磨耗的根本原因,轮轨表面的各种不平顺能激发或者加剧轮轨系统在580 Hz频率附近的模态共振,从而诱发车轮多边形磨耗的产生。该结果可为高速列车车轮多边形磨耗问题的防止和进一步研究提供参考。     

起重机自重应力对安全评估中应力测试实验结果的影响

应力测试是起重机安全评估中必须进行的一项检测。目前在安全评估工作中常采用应变电测法来采集起重机工作过程中的应力时程数据,由于该方法只能采集到结构由于载荷变化产生的应力,而无法采集到结构因自重产生的应力,导致应力测试无法获取结构的完整应力。利用起重机金属结构自重应力在总应力中占有的权重,分析其对应力测试实验结果的影响大小,试验结果表明在危险截面自重应力大小占总应力大小可达60%,此时不考虑自重应力进行结构安全性的判定是不全面的。可考虑利用仿真技术获取自重应力[1,2],从而使得安全评估应力测试实验结论更加准确。     

装填设备载荷影响因素分析及动力学仿真

大型货物的装填过程中影响载荷的因素较多,其中对中精度对装填载荷影响较为明显。通过动力学仿真软件ADAMS对装填过程中载荷进行模拟,并对各影响因素进行定量分析,得到对中偏差与装填载荷的关系。将仿真结果与试验数据进行对比,验证该仿真方法的正确性,可作为后续研究装填载荷的一种方法,为结构设计提供指导。     

风速时间序列混沌判定方法比较研究

混沌识别是对非线性时间序列进行混沌预测的前提。针对时间序列风速确定性与随机性相结合的复杂非线性特征,研究了不同的混沌识别方法,并对风速时间序列进行混沌特征识别。应用随机噪声、周期运动及经典混沌系统的时间序列对所选方法进行可靠性验证。对美国国家风能研究中心M2测风塔实测时间序列风速数据进行非线性混沌特征识别。结果表明:风速时间序列具有明显的混沌特征;各风速时间序列表现出不同程度的混沌特征;各混沌识别方法对风速时间序列混沌特征的表达形式不同,互为补充,相互验证。     

Test sample allocation method for testability verification test

An extended failure mode effect and criticality analysis (FMECA)-based sample allocation method for testability verification is presented in this study to deal with the poor representativeness of test sample sets and the randomness of the testability evaluation results caused by unreasonable selection of failure samples. First, the fault propagation intensity is introduced as part of the extended information of FMECA, and the sample allocation impact factors of component units and failure modes are determined under this framework. Then, the failure mode similarity and impact factor support are defined, and the game decision method for weighing the relationship between similarity and support is proposed to obtain the weight of failure mode impact factor. Finally, a two-step allocation framework of test samples is formulated to realize the sample allocation of component units and failure modes. This method is applied to the testability verification test of a launch control system. Results show that this method can obtain more representative test samples compared with the traditional sample allocation method while effectively reducing randomness of single testability evaluation result.